How To Guides

How To Install Natural Edge Weatherboards

Follow our simple 5 step guide on installing RadialTimber’s “Natural Edge Weatherboards.

Step 1: Number each board sequentially
Step 2: Cut the end of the log off, 350mm in on each side.
Step 3: Cut the natural edge off your first board so it is straight.
Step 4: Measure and cut each board to your required length.
Step 5: Sequentially nail the natural edge from the bottom up.
Remember: Make sure you keep each board roughly parallel to each other by eye.
And spacing and coverage can be varied as you go.

How To Install Secret Fixed Shiplap

COMING SOON

How To Install V Joint Shiplap

COMING SOON

How To Install Radial Screenboards

COMING SOON

How To Install Radial Decking

COMING SOON

How To Install Board And Batten

COMING SOON

Radial Timber Calculator
_   X
Select Product:
Width of the deck
m
Length of the deck
m
Joist spacing on centre in millimetres (eg. 450)
mm
Coverage of deck board in millimetres (eg. 75)
mm
Gap between deck boards in millimetres (eg. 5)
mm
Screws per intersection of joist & deck board (eg. 2)
screws
Wastage Allowance
%
Totals
m2
screws
lm
L of Aussie Clear
Please note that this tool is to be used as a guide only.
Radial Timber takes no responsibility for the incorrect usage of this tool and advise that customers ensure that the quantities calculated are correct.
X 
Deck and Screw Calculator Help